Primera AP362 User Manual page 6

6. Now position the stock to correspond with the general area where it will be applied to
7. Pull the loose end of the label stock forward and then push it into the Feed Area from the back
Figure 2-5.
8. Pull approximately 12 inches of label stock out beyond the Peel Edge. (Figure 2-6.)
Figure 2-6.
6 AP360/362 Label Applicator
the container.
of the label applicator. The labels will come out just underneath the Peel Edge. (Figure 2-5.)
Tip! See Section 5 for
a Label Path diagram.