Changing Engine Oil, Oil Filter, And Fuel Filter (Kohler-Powered Units) - Hobart Welding Products CHAMPION ELITE Owner's Manual

9-4. Changing Engine Oil, Oil Filter, and Fuel Filter (Kohler-Powered Units)

Full
Tools Needed:
3
1
.
A complete Parts List is available at www.HobartWelders.com
!
1
2
3
Change engine oil and filter accord-
ing to engine owner's manual.
!
Fill crankcase with new oil to full
mark on dipstick (see Section 5-5).
4
5
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
4 !
5
2
Stop engine and let cool.
Oil Drain Valve
1/2 ID x 7 in Hose
Oil Filter
Close valve and valve cap
before adding oil and
running engine.
Fuel Filter
Fuel Line
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
244 033-A / S-0842
OM-240 438 Page 41