Changing Engine Oil, Oil Filter, And Fuel Filter (Subaru-Powered Units) - Hobart Welding Products CHAMPION ELITE Owner's Manual

8-5. Changing Engine Oil, Oil Filter, and Fuel Filter (Subaru-Powered Units)

Oil Check
Full
3
4
Tools Needed:
Oil Fill
.
A complete Parts List is available at www.HobartWelders.com
!
1
2
Change engine oil and filter accord-
ing to engine owner's manual.
NOTICE − Close valve and valve
cap before adding oil and running
engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 5-4).
3
4
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
!
2
1
Stop engine and let cool.
Oil Drain Valve
Oil Filter
Fuel Filter
Fuel Line
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
244 032-A / Ref. 281 080-A / S-0842
OM-240 438 Page 35