Changing Engine Oil, Oil Filter, And Fuel Filter - Hobart Welding Products Champion Elite 225 Owner's Manual

8-4.

Changing Engine Oil, Oil Filter, And Fuel Filter

Stop engine and let cool.
1 Oil Drain Valve
Change engine oil and filter according to en-
gine owner's manual.
NOTICE – Close valve and valve cap before
adding oil and running engine.
rubbergloves weldgloves
Fill crankcase with new oil to full mark on dip-
stick (see Section 8-2).
2 Fuel Filter
3 Fuel Line
Replace line if cracked or worn. Install new
filter with arrow pointing in the direction of
fuel flow. Wipe up any spilled fuel.
Start engine, and check for fuel leaks.
Stop engine, tighten connections
as necessary, and wipe up fuel.
glasses
Reset oil maintenance countdown by leaving
the engine off and flipping Engine Control
allen_wrench
switch from Run/Idle to Run three times.
oilcan pliers filtersocket
snapringpliers solderiron linepliers
pinextractor2
torque screwdriver
torque wrench
pinextractor (141761)
T_allen
Needle-Nose Vise Grip
strapwrench
earmuffs ear plugs
hairdryer cclamp
allen_set
needlenose hacksaw
knife
pencil
heavy-duty work
stripcrimp
tip_dress
SOAP
socket wrench
bar soap
Thermal C
Ground Strap
hammer
airgun
OM-266040 Page 37
tools
flat
seala
drill
Trow