Table of Contents
Advertisement
Administrator's Guide SoundPoint IP / SoundStation IP
USB Port <usb/>
Attribute
usb.enable
Attribute
usb.bulkDrive.enable
usb.bulkDrive.name
Per-Phone Configuration
A - 82
This attribute's settings control the USB port.
This configuration attribute is defined as follows:
Permitted Values
0, 1
This attribute also includes:
•
Bulk Drive <bulkDrive/>
Bulk Drive <bulkDrive/>
These settings control the bulk drive or memory stick.
Permitted Values
0, 1
alphanumeric string
This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone
configuration files. For more information, refer to
Boot Server
on page 3-14.
Polycom recommends that you create another file with your organization's
modifications. If you must change any Polycom templates, back them up first.
For more information, refer to the "Configuration File Management on SoundPoint
IP Phones" whitepaper at www.polycom.com/support/voice/.
The parameters include:
•
Registration <reg/>
•
Calls <call/>
•
Diversion <divert/>
•
Dial Plan <dialplan/>
Default
Interpretation
Null
This parameter enables or disables the USB
port on the phone.
Default
Interpretation
Null
This parameter enables or disables support for a
USB bulk drive connected to the USB port on
the phone.
usbDrive
This parameter is a string which specifies the
name of the mounted USB drive.
Deploying Phones From the
Advertisement
Table of Contents
