Ram Disk <Ramdisk; Request <Request - Polycom SIP 2.2.2 Manual

Administrator's Guide SoundPoint IP / SoundStation IP
RAM Disk <ramdisk/>
Attribute
ramdisk.enable
ramdisk.bytesPerBlock
ramdisk.blocksPerTrack
ramdisk.nBlocks
ramdisk.minsize
ramdisk.minfree
Request <request/>
A - 76
This attribute's settings control the phone's internal RAM disk feature.
Polycom recommends that you do not change these values.
Permitted
Values Default
0, 1 1
0, 32, 33, ..., 0
1024
0, 1, 2, ..., 0
65536
0, 1, 2, ..., 4096
65536
50 to 16384 50
512 to 16384 3072
This attribute includes:
• Delay <delay/>
Interpretation
If set to 1, RAM disk will be available. The RAM
disk is used to cache downloaded wave files, and
other resources for the user interface.
These three parameters use internal defaults
when value is set to 0.
Note: For the SoundPoint IP 650 platform,
ramdisk.bytesPerBlock is internally replaced by 2X
the value.
Smallest size in Kbytes of RAM disk to create
before returning an error. RAM disk size is variable
depending on the amount of device memory.
Minimum amount of free space that must be left
after the RAM disk has been created. The RAM
disk's size will be reduced as necessary in order to
leave this amount of free RAM.