Pnp/Pci Configurations - Foxconn 6100M2MA series User Manual

PnP/PCI Configurations

vInit Display First
This item is used to set which display device will be used first when your PC
starts up.
vReset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses each time the machine is turned on.
The setting values are: Disabled and Enabled.
vResources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed not support-
ing PnP, you will need to select "Manual" and manually adjust interruption
resources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
vIRQ Resources
Press the <Enter> key, then manually set IRQ resources.
vPCI/VGA Palette Snoop
If you use a nonstandard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
vMaximum Playload Size
This item is used to set maximum payload size for PCI Express device.The
unit is byte.
42
PnP/PCI Configurations Menu
Chapter 3 BIOS Description