Foxconn 6100M2MA series User Manual page 48

vHDD Power Down
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time. The setting values are Disabled and 1Min-15Min.
vHDD Down In Suspend
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are Disabled and Enabled.
vSoft-Off by PBTN
This option is used to set the power down method.
vWOL(PME#) From Soft-Off
W hen set to Enable, the feature allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event)
vWOR(RI#) From Soft-Off
If this item is enabled, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an in-
stalled fax/modem. This function needs to be supported by the relevant hard-
ware and software.
vCase Open Warning
This option is used to enable or disable case open warning function.
vPower-On by Alarm
This option is used to enable or disable the feature of booting up the system
on a scheduled time/date. The setting values are Disabled and Enabled.
vDate of Month Alarm
W hen the Power-On by Alarm set as "Enabled", this option will be modified. It
is used to set the timing for the start-up date. The setting values contain 0 - 31.
vTime (hh: mm: ss) Alarm
W hen the Power-On by Alarm set as "Enabled", this option will be modified. It
is used to set the timing for the start-up date. The setting values contain hh: 0-
23; mm: 0-59; ss: 0-59.
vPOWER ON Function
This option is used to set the POWER ON function.
vKB Power On Password
This item is used to set Keyboard Power On Password.
vHot Key Power On
This item is used to set Hot Key Power On.
vPWRON Ater PWR-Fail
This option is used to set the PW RON after PWR-Fail.
Chapter 3 BIOS Description
41