Pnp/Pci Configurations - Foxconn MCP61PM2MA User Manual

PnP/PCI Configurations

v Init Display First
This option is used to set which display device will be used first when your PC
starts up.
v Resources Controlled By
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on. The setting values are: Disabled and Enabled.
vIRQ Resources
Press the <Enter> key, then manually set IRQ resources.
vPCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
vMaximum Payload Size
This option is used to set maximum TLP payload size for PCI Express devices.
The unit is byte.
34
Chapter 3
PnP/PCI Configurations Menu
BIOS Description