Connecting To Line Power; Front-Panel Features - Fluke 5725A Getting Started

5725A
Amplifier

Connecting to Line Power

Warning
To avoid shock hazard, connect the factory-
supplied, three-conductor line power cord to
a properly grounded power outlet. Do not
use a two-conductor adapter or extension
cord; this will break the protective ground
connection.
After verifying that the line voltage selection switches are
correctly set, verify that the correct fuse is installed.
Connect the 5725A to a properly grounded three-prong
outlet.
18

Front-Panel Features

Front-panel features are called out in Figure 6 and are
described in Table 3.