Weider MAX XP400 User Manual page 9

12, Attach a PUastic Foot (53) to the Backrest Frame
(15) with an M4 x 16mm Screw (62),
Attach the two Guard Hates (17) to the inside of
the Backrest Frame (15) with four M4 x 16mm
Screws (62),
13, Orient the Backrest (14) as shown, Attach the
Backrest to the Backrest Frame (15) with four
1/4" x 45mm Screws (58),
Unsert the rod on the Backrest Frame (15) into the
sUotin the Seat Carriage (12), HoJd the Backrest
Frame vertically over the Seat Carriage and
slide the rod into the slot, as shown in the
inset drawing.
14, Attach the two lO-pound Short Resistance Bar
Caps (20) to the lO-pound Center Resistance Bar
(44) with two M4 x 12mm FUatHead Screws (85),
Using tweUve M4 x 12mm FUatHead Screws (85),
attach the two lO-pound Resistance Bar Caps
(18) to the lO-pound Resistance Bar (67), the two
20-pound Resistance Bar Caps (88) to the 20-
pound Resistance Bar (36), the four 80-pound
Resistance Bar Caps (37) to the two 80-pound
Resistance Bar (95), and the two 40-pound
Resistance Bar Caps (79) to the 40-pound
Resistance Bar (96),
12
13
14
15
62
62
,/
17
\
85-
2O
18
37
9