Warning Decal Placement - Weider MAX XP400 User Manual

TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 2
iMPORTANT PRECAUTIONS ................................................................ 3
BEFORE YOU BEGIN ...................................................................... 4
ASSEMBLY ............................................................................... 5
ADJUSTMENTS .......................................................................... 13
CABLE DIAGRAM ......................................................................... 16
EXERCISE GUiDELiNES .................................................................. 17
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LiMiTED WARRANTY .............................................................. Back Cover
Note: A PART iDENTiFiCATiON CHART and a PART LIST/EXPLODED DRAWING are attached in the center of
this manual, Remove the PART iDENTiFiCATiON CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly,
WARNING DECAL PLACEMENT
The decaJs shown here have been
placed on the resistance system. If a
decaJ is missing or illegible, please call
the toll-free teJephone number on the
front cover of this manual and order a
free replacement decal Apply the decaJ
in the location shown.
:eep hands and
r!gers dear of
_s area.
Misuse of this product may resdt in serious injury.
• Read user's manual and fomlowaHwarnings
and operating instructions prior to use.
Do not albw cHdren on or around machine.
• Replace mabeR if damaged, ilbgible, or removed.
WELDER is a registered trademark of iCON IP, Inc,
2