Weider PowerGym 15601 Owner's Manual page 18

PAGE 17
WELDER SPORTING GOODS
[]
Assemble a PULLEY TRAP
BRACKET (29) to the Welded
U-Bracket on the side of the
TOP FRAME (8) using a 5116"
X 3" HEX HEAD BOLT (67) to
bolt down through the top of
the U-Bracket and then through
the Pulley Trap Bracket.
Secure with a 5116" NYLON
LOCK NUT (71).
©
WELDED
U-BRACKET
29
STEP 14 UPPER PULLEYS & CABLE ASSEMBLY
IPART NAME
63 5/16" X 3"HEX HEAD BOLT
70 5/16" FLAT WASHER
71 5/16" NYLON LOCK NUT
72 3/8" X 2 1/2" HEX HEAD BOLT
73 3/8" X 1 3]4" HEX HEAD BOLT
78 3]8" FLAT WASHER
79 3/8" NYLON LOCK NUT
91 1/2" X 1/2" ZINC BUSHING
92 1/2" METAL SPACER
QTY
1
2
1
1
5
2
, i
• 1, ..i¸¸
2 ,_
[]
Locate the PEC-DECK CABLE (37).
The Pec-Deck Cable is 127 inches long
and has a Rubber Stopper Bail on one
end and a loop on the other end.
37
[]
Insert the PEC-DECK CABLE (37) up
through the slot in the front of the TOP
FRAME (8) so that the Rubber Stopper
Ball is to the front and underneath the
Top Frame.
8
[]
Drape the PEC-DECK CABLE (37)
over a 4 112" PULLEY (50) and
assemble it into the slot using a 318" X
2 t/2" HEX HEAD BOLT (72), 318"
FLAT WASHER (78), .and i_i_!12"_..
METAL SPACER (92). Insert the Bolt
with the Spacer and Washer through
the Frame and the Pulley "and then
assemble another 112" METAL
SPACER (92) and a 3/8" FLAT
WASHER (78) and fasten with a 3/8"
NYLON LOCK NUT (79).
24
_N
78
79
STOPPER BALL
/
/