Weider Cross Bow Advantage 831.153960 User Manual page 20

PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small
parts may have been pre-attached. If a part is not in the pai'ts bag, check to see if i_has been pre-attached.
M6 Nylon Locknut (69)
M8 Flange Nut (19)
M10 Nut (47)
M10 Lock Washer (103)
19mm Round Inner Cap (78)
25mm Square Inner Cap (54)
f
M8 Nylon Locknut (65)
M10 Washer (75)
M10 Nylon Locknut (76)
M8 Washer (59)
J
45ram Square Inner Cap (42)
50mm Square Inner Cap (98)
38mm Round Inner Cap (38)
I lll
I
38ram x 64ram Inner Cap (41)
38mm x 76ram Inner Cap (99)