Setting Up Your Lawn Tractor; Attaching The Battery Cables; Attaching The Seat - Troy-Bilt Super Bronco Operator's Manual

Use extreme care
when
gasoline: Gasoline is
extremely flammable
and the vapors ale
explosivei Never fuel
machine indoors
or while the engine
is hotorrunning.
Extinguish cigarettesl
cigars; p ipes, and
other sources of
NOTE: ThiS Operators
Manual Covers a range
of product specifications
for Variousmodel&
Characteristics a nd
features discussed
and/or illUstrated in
this manualmaynOtbe
applicableto all models:
MTD LLC reserves the
right to change product
specifications, designs
and equipment without
notice andwithoutincur:
Rubber Boot
Figure 3-1
Figure 3=2
NOTE:This OperatorsManualcoversa rangeof product
specifications for variousmodels.Characteristics and fea-
turesdiscussedand/orillustratedin this manualmay not
be applicableto all models.MTDLLCreservesthe right
to changeproductspecifications, d esignsand equipment
withoutnotice and withoutincurringobligation.
Attaching the Battery Cables
NOTE:Thepositivebatteryterminalis markedPos. (+).
Thenegativebatteryterminalis markedNeg. (-).
• Thepositivecable(heavy redwire) is securedto the
positivebatteryterminal(+)with a hexbolt and hex
nut at thefactory.Beforeattachingthe negativecable,
notethe dateon theside of the battery.If the battery
is put into serviceafter this date, chargethe battery
as instructedin the Maintaining Your LawnTractor
sectionof this manualprior to operatingthe tractor.
• Removethehex boltand hexnut fromthe negative
J/ cable.
.J
Removetheblack plasticcover,ifpresent,from the
negativebatteryterminaland attachthe negative
cable(heavy blackwire)to the negativebattery
terminal(-) with thebolt and nut.
Attaching The Seat
NOTE:Forshippingreasons,seatsare eitherfastened
to the tractorseat'spivot bracketwith a plastictie, or
mountedbackwardto the pivot bracket.Ineithercase,
freethe seat form its shippingpositionand removethe
two hex screws(or knobs,on modelsso equipped)from
the bottomof seatbeforeproceedingwith applicable
instructionsbelow.
1. Positionthe shoulderscrews(foundon the baseof the
seat) insidetheslot openingsin the seat pivot bracket.
Fig. 3-2.
2. Slide the seatslightlyrearwardin the seat pivot
bracket,liningup the rearslots in the pivot bracket
with the remainingtwo holesin the seat'sbase.
.
Selectdesiredpositionforthe seat,and securewith
the two knobs removed earlier.See Fig.3-2.
8