Quick Reference - Sharp LC-19LS410UT Operation Manual

QUICK REFERENCE
• Please use care when disassembling cabinet, stand, and pillar for wall
mounting.
° Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless using an optional wall mount
bracket to mount it.
1. Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver.
Remove stand cover from the TV set.
A B
These 2 screws need to be installed
in the right holes. Do not force or
overtighten and do not install without
stand covers. Failure to follow this
procedure will cause damage to the
cabinet.
19" /22" 32"
° To attach the stand neck, perform the steps in reverse order.
° Do not force or overtighten and do not install without stand covers.
(_])- 9