Quick Reference - Sharp LC-42D65U Service Manual

QUICK REFERENCE

Attaching the Stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confirm that there are 8 screws (4 short screws
and 4 long screws) and a hex key supplied with the
stand unit.
2 Attach the supporting post for the stand unit onto
the base using the box for the stand unit as shown
below.
The supporting post attaches to the base at an off-centered
location on the base. Be sure to attach the supporting post in
the direction indicated below and attach the stand to the TV
with the wider side of the base facing forward.
Long screws
Forward
3 Insert the stand into the openings on the bottom
of the TV.
Insert and tighten the 4 short screws into the 4
holes on the rear of the TV.
Hex key
To detach the stand, perform the steps in reverse order.
2 – 3
Hex key
Short screws
2
Soft cushion
1
LC-42D65U
2
1