Color Temperature; Warm; Normat; Coot - Sharp LC-19LS410UT Operation Manual

On-Screen Display Menu
Adjust the best picture appearance from
selecting the preset value of Standard,
Movie, Power Saver, User, or Sports.
For a better white balance, use color
temperature correction.
White with reddish tone
t
Warm:
Normal:
Cool:
White with bluish tone
• User:
White balance can be adjusted manually
through the R/G/B Gain between a
maximum of +100 and a minimum of
-100 for each color temperature.
Provide various advanced functions for
optimizing the picture quality.
DI Film Mode
Automatically detects a film-based source
(originally encoded at 24 frames/seconds),
analyzes it then recreates each still film
frame for high-definition picture quality.
Blue Stretch
When Blue Stretch is selected, the
brightest part of the screen will be leveled
down to reduce the saturation.
Game Mode
The Game Mode enhances the gaming
experience by reducing game controller
delay.
HDMI Mode
HDMI Mode only shows and is available
when HDMI device is connected. Select
from Auto, Graphic, or Video.
DNR
DNR (Digital Noise Reduction) enables you
to "soften" the screen representation of
a weak signal to reduce the noise effect.
Select effect degrees from Low, Medium,
Strong, Auto, or Off. The default setting is
Medium.
MPEG NR
If the receiving signal of MPEG has
a grained noise depending on the
compression and conversion, the noise
may be reduced when using this function.
Adaptive Luma Control
Automatically adjusts the brightness and
contrast after analyzing the input signal.
This function enriches the colors and the
depth of the picture.
Flesh Tone
You can adjust the skin color to be more
natural.
• Auto: The HDMI input timing is set
to Video mode or Graphic mode
automatically
• Graphic: HDMI input timing set to
Graphic mode (PC). The image is full
scan
Video: HDMI input timing set to Video
mode. The image is over scan.
HDMI Mode is only workable for HDMI
Video & Progressive timing as followed:
1920xl 080p, 1280x720p, 720x480p,
720x576p.
Adaptive Backlight
When Adaptive Backlight is activated, it
will automatically optimize the backlighting
levels for dark scenes.
The VGA adjustment is only available
when the input source is PC and your
TV is receiving a computer signal. Select
Auto Adjust for adjusting the settings
automatically, or select H. Position, V.
Position, Phase or Clock and use • or I_
to adjust your preference.
(D- 29