Using The Remote Control Unit - Sharp LC-19LS410UT Operation Manual

Preparation
If the remote control fails to operate TV functions, replace the batteries in the remote
control unit.
1 Open the battery cover. 3 Close the battery cover.
2 Insert two "AA" size batteries (supplied
with the product).
Place the batteries with their terminals
corresponding to the ( + ) and ( - )
indications in the battery compartment.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow
the instructions below.
• Do not mix batteries of different types. Different types of batteries have different
characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of
new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries
come in contact with skin can cause a rash. If you find any chemical leakage, wipe
thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to
storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove
batteries from it.
• The batteries (batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
(_-13