Aastra 9110 User Manual page 7

4. Attach the line cord to the telephone stand 5. Wall mounting installation
Route the line cord along the groove
on the telephone stand as shown in
the illustration.
6. Wall mounting installation with stand
The telephone can be wall mounted at an angle (tipped back slightly) by using the
stand. Screw the stand to the wall using the two round holes in the stand (wedge
part down, holes up). Connect line cord to the telephone. Attach the telephone stand.
It is recommended that you use a
wall-mounting plate which is available
through your telephone company
or a local retailer. You will Þnd it easier
to wall-mount the telephone if you
purchase a short telephone cord and use
it in place of the long telephone cord.
Coil the telephone cord into the space
provided on the back of the telephone.
Line up the keys on the wall mounting
plate with the key holes on the back of
the telephone.
Place the telephone onto the wall
mounting plate, and then push down
to secure the telephone into place.
6