Lanier LD235 Operating Instructions Manual page 56

Specifying group destinations
A Press the Destination key pro-
grammed with the desired group.
Note
❒ The destination list registered in
the desired group, whose type
is selected in step
❒ To cancel any destination(s)
among the group, press [UP-
rev.] and [TNext] to display
th e d e si r e d d e sti n at io n .
Then, press the {Clear/Stop}
key. You can also cancel a
transmission by pressing the
highlighted Destination key
to deselect it.
A
, appears.
D
Press the {Start} key.
Specifying a Destination
❒ If a destination where a fax
number, e-mail address, or
IP-Fax number is not pro-
grammed is included in the
specified group, the "
sp e c if i e d g r o up c o n-
tains some invalid des-
tination(s). Do you want
to select only valid
destination(s)?
sage appears. Press [Select] to
specify destinations where
the fax number, the e-mail
address, or IP-Fax is pro-
grammed. Press [Cancel] to
change the destination. If the
destination in destination
type does not exist, you can
prioritize a destination you
want to quote. See p.167 "Us-
er Parameters", Facsimile Ref-
erence <Advanced Features>
(switch 32, bit 0).
❒ To select more groups, repeat
B C
steps and .
The
2
" mes-
47