Lanier LD235 Operating Instructions Manual page 111

Troubleshooting
Problem
Transmission is possible,
though receiving is impossi-
ble.
Receiving is possible, though
transmission is impossible.
While pressing [Manual E-mail
RX], "
Cannot receive
E-mails currently.
5
appears and e-mail cannot be
received.
When using On Hook Dial or
Manual Dial, "
" appears and trans-
ing...
mission is not allowed.
LAN-Fax Driver does not
work.
102
Causes and solutions
The setting of the terminal
adaptor used for ISDN con-
nection is incorrect. Check the
setting.
The setting of the terminal
adaptor used for ISDN con-
nection is incorrect. Check the
setting.
There are regions and tele-
phone exchanges where a dial
tone can not be detected. Turn
the dial tone detection off in
User Parameters.
The machine is receiving an
on-demand e-mail message (e-
mail inquiry from the admin-
"
istrator). After the e-mail is re-
ceived, press [Manual E-mail
RX], and then try again.
If the machine fails to detect
the size of the original when
Receiv-
the {Start} key is pressed, it
performs a receiving opera-
tion. Press [Scan Area], select
the scan area, and then resend
the document. If you use On
Hook Dial or Manual Dial fre-
quently, it is recommended
that you set "Receive docu-
ments by pressing the {Start}
key when originals are not
set." to "Off" in User Parame-
ters. If this is set to "Off",
when using Manual Dial you
cannot receive by pressing the
{Start} key.
The entered login user name,
login password, or driver en-
cryption key is incorrect.
Check your login user name,
login password, or driver en-
cryption key, and enter them
correctly.
A high security level is set by
the extended security func-
tion. Consult your administra-
tor about appropriate security
settings.
Reference
---
---
p.167 "User Parameters", Fac-
simile Reference <Advanced Fea-
tures> (switch 22, bit 0, 1, 2)
---
p.17 "Setting a Scan Area"
Ask the administrator.
Ask the administrator.