Lanier LD235 Operating Instructions Manual page 20

4.
Displays messages and the machine
status.
5.
Displays the entered number of a
destination. When adding destina-
tions using the number keys, press
[Add].
6.
Press to display various informa-
tion about transmission.
7.
Switches transmission mode be-
tween Memory Transmission and
Immediate Transmission. See p.20
"Switching between Memory Trans-
mission and Immediate Transmis-
sion".
8.
Displays Quick Operation keys
set for frequently used functions. [TX
File Status] and [RX File Status] are pre-
set. See p.145 "General Settings/Ad-
justment", Facsimile Reference
<Advanced Features> .
❖ To return to standby mode, do one of the following:
• If you have placed the original in the optional Auto Document Feeder
(ADF) and have not pressed the {Start} key, remove the original.
• If you have not placed an original, press the {Clear Modes} key.
• If you are in User Tools mode, press the {User Tools/Counter} key.
9.
Displays various sending functions.
See p.20 "Transmission Modes",
p.62 "Sub Transmission Mode", Fac-
simile Reference <Advanced Fea-
tures> , p.134 "Storing a Document",
Facsimile Reference <Advanced Fea-
tures> .
10.
Title word keys appear. Allows
you to switch from one page (dis-
play) to another on the destination
list. See p.46 "Switching the titles of
destination lists".
11.
Allows you to search for a desti-
nation by destination name, fax
number, e-mail address or registra-
tion number.
12.
Appears on Destination keys
programmed as a transfer station.
13.
Appears on Destination keys
programmed with a group of desti-
nations. See "Registering Names to a
Group", General Settings Guide.
Control Panel
1
11