Lanier LD225 Function Manual page 86

Configuring/Registering Scan Settings
❖ Scan Size
Select the size of the original to
be scanned.
When [Auto Detect] is selected,
the auto detect function of the
machine is used to set the origi-
nal size.
When the size is specified, scan-
ning is performed for that size,
regardless of the actual size of
the original. The following sizes
can be selected:
A3S, A4R, A4S, A5R, A5S,
11 × 17S, 8
×13S, 8
× 8
1
5 /
2
JISS ( J a p a n e s e I n d u s t r i a l
Standard), B5 JISR, B5 JISS,
Custom Size
Note
❒ When [Custom Size] is select-
ed, the dimensions of the
scan area (width and height)
7
can be specified.
❒ When selecting [Custom Size]
for [Scan Size], see p.107
"Scanning a custom-size
original".
❖ Edit
Make editing settings.
• Erase Border
Delete the borders of the
scanned original according
to the width specified.
If you select [Same Width], you
can specify, in millimeters
(inches), a uniform width for
deleting all sides (top, bot-
tom, left, and right). If you
select [Diff. Width], you can
specify, in millimeters (inch-
es), a different width for de-
leting each side.
78
×14S, 8
1 1
/
2
× 11R, 8 ×11S,
1 1
/ /
2 2
× 8
1 1 1
/ R, 5 / / S, B4
2 2 2
❒ If you set [Scan Size] to [Au-
C
Press [OK].
/
2
Note
to Detect] and specify
[Mixed Sizes], one of the
sides cannot be deleted.