Handle Height - Snapper SPV2270HW Operator's Manual

Assembly
Adjusting the Handle Height
1. Remove the wingnuts (A, Figure 4), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
NOTE. Do not remove the lower set of handle hard-
ware (D).
Figure 4: Removing the handle adjustment hardware
2. Adjust the handle to a higher or lower height
adjustment hole (A, Figure 5).
3. Reinstall the boks, washers and wingnuts removed
in Step 1.
Figure 5: Height adjustment holes
(Components removed for clarity)