Table of Contents
Advertisement
Available languages
Available languages
To replace door on hinges:
1. Using a fiat screwdriver, remove
the plug buttons
from the screw holes opposite
the
hinges, top and bottom. Set aside.
2.
Remove the bottom hinge and place it on the opposite side at the bottom of the door.
3.
Position the door on the bottom hinge.
4.
Align the door on the bottom hinge and replace the top hinge and top hinge mat.
5.
Replace top hinge cover.
6.
Push the plug buttons into the original screw holes.
door
Water Supply
The water supply should be ready at the point of installation. The water supply pressure
should
be a minimum of 15 psig with a static pressure
not more than 80 psig. (A wall outlet directly
behind the ice machine will make installation easier.)
IMP OR TANT"
•
All installations
must be in accordance
with local plumbing
code requirements.
Professional
installation
is recommended.
•
Make
certain
that the hoses are notpinched
or kinked
or damaged
during
installation.
•
Check for
leaks after connection.
Tools
required:
1/2" open-end
wrenches,
Phillips
screwdriver
Rear of unit
f'l°
Water inlet
Drain outlet
13
Advertisement
Chapters
Table of Contents
