Leveling The Ice Maker; Water Supply And Drain Connections - Orien FS-65IM User Manual

Leveling the Ice Maker
It is important for the ice maker to be leveled in order to work properly. It can be raised
or lowered by rotating the plastic sheaths around each of the four rolling casters on the
bottom of the machine. If you find that the surface is not level, rotate the casters until the
ice maker becomes level. You may need to make several adjustments to level it. We
recommend using a carpenter's level to check the machine.
You will find that the casters make it easy for one person to move the machine. This is
useful for cleaning and sanitizing the surface on which the ice maker is installed because
it allows you to move the unit and have easy access to the surface to be cleaned.
IMPORTANT: Once you are ready to install the ice maker in a cabinet or directly on the
,floor, you must adjust the feet to level the ice maker and lock the rollers. If the floor is
level, just revolve the two front feet to touch the floor. (See illustration.)
Water Supply and Drain Connections
The water supply and drain should be ready at the point of installation. A wall outlet
directly behind the ice maker will make installation easier.
IMPORTANT:
1. All installations must be in accordance with local plumbing code requirements.
Professional installation is recommended.
2. Make certain that the hoses are not pinched or kinked or damaged during installation.
3. Check for leaks after connection.
Tools required:
- 1/2 in. open-end wrench
- Phillips screwdriver
11