Table of Contents
Advertisement
Available languages
Available languages
Installation
Types
This ice maker has been designed
for Mobile (free-standing),
Enclosed
(as under a cabinet)
or
Built-in
(sealed) installation,
indoor or outdoor. In any case, there must be adequate
air space
around the unit for proper ventilation.
(See diagrams on page 8.)
Mobile installation:
A mobile installation
will allow you to install the ice maker flee-standing
in any place you desire
provided you have access to a water supply. You must follow the stated instructions
for
a. Electrical
requirements
b. Water supply
c. Leveling the ice maker
Enclosed
Installation:
An enclosed
installation
will
allow
you
to install
the ice maker
under
a cabinet
or inside
a
kitchen
cabinet
provided
the required
clearance
space
around
the ice maker
is respected.
This
installation
has the same requirements
as a mobile
installation.
Built-in
Installation:
If this method
of installation
is chosen,
it will
still be necessary
to allow
adequate
ventilation
space
around the unit. The following
additional
items must be observed.
1. Place ice maker in front of installation
location.
Remove
the legs and place the unit fiat on
the floor or on a platform
depending
on your installation
requirements.
.
3.
The water supply line must be plumbed before connecting
to the ice maker.
Connect the drain hose.
4.
Turn on main water supply and tap. Check for water supply connection
leaks. Tighten every
connection
(including
connections
at the water inlet).
5.
If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker.
6.
Push the ice maker into position.
7.
Seal all around the cabinet to the floor with an approved
caulking compound.
15
Advertisement
Chapters
Table of Contents
