Advertisement
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console's
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Plug one end of your audio cable into the audio jack
on the console. Plug the other end into a jack on your
MP3 player, CD player, or other personal audio player.
Make sure that your audio cable is fully plugged in.
Next, press the play button
on your MP3 player, CD
player, or other personal
audio player. Then, adjust
the volume level on your
personal audio player or
press the volume increase
and decrease buttons on
the console.
Increase
Decrease
Jack
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to a
wireless network including an 802.11b/n router with
SSID broadcast enabled (hidden networks are not
supported).
To open the browser, touch the globe button near the
lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back
button on the console or touch the Browser Back but-
ton on the screen. To exit the browser, press the home
button on the console or touch the Return button on
the screen.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 14.
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the key-
board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed,
incline, fan, and volume buttons will still function, but
the workout buttons will not function.
Note: if you have questions
after following
these
instructions, go to support.iFit.com
for
assistance.
HOW TO ADJUST THE CUSHIONING
SYSTEM
Remove the key from the console and unplug the
power cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill.
To increase the firmness of the walking platform, step
off the treadmill and use a hex key to turn the cush-
ion adjustors clockwise 1/4 turn until the word "Off"
appears next to the cushion adjustor.
Cushion
Ad
Cushion
Adjustor
To decrease the firmness, step off the treadmill and
use a hex key to turn the cushion adjustors counter-
clockwise 1/4 turn until the word "On" appears next to
the cushion adjustor.
Note: Make sure that both cushions
are set at the
same firmness
setting. The faster you run on the
treadmill,
or the more you weigh, the firmer the
walking
platform should be.
24
Advertisement
