Nikon COOLPIX P7100 Reference Manual page 67

The ISO sensitivity is controlled automatically to a high
low-lit scene and shoot pictures with a low amount of
noise without using the flash. It also reduces the effects s_ _ oN_
of camera shakeand subject movement when shooting
at the telephoto zoom position.
• The ISO sensitivity is set automatically within the range of ISO 400 to 12800.
•
To
use the
flash,
raise the flash.
• Tile focus area for autofocus differs depending on tile setting olAF area mode
that can be selected in tile ._] tab after pressing tile MENU button.
• When AF area mode is set to Auto (default setting), tile camera has nine focus
areas, and automatically selects tile focus areas containing the subject closest to
the camera. When the subject is in focus, the focus area active focus area) lights
in green (maximum of nine areas).
5
t_
e_
_1_ Notes on Low Noise Night Mode
• Although vibration is reduced even in low lit environments, a tripod recommended when not
using a flash. Set Vibration reduction (_ 105) to Off when using a tripod to stabilize the camera,
• The picture taken may be grainy, because the shooting is performed with ISO sensitivity set to a
high level.
• The appropriate exposure may not be obtained (overexposure) in clear sunlight, because the
shooting is always performed at iSO 400 or higher,
• The camera may be unable to focus in extremely dark environments,
• The slowest shutter speed is restricted to 1/4 second.
• in low noise night mode, the available image size (_73/is [_ 2048xl $36 or smaller,
Built-in ND Filter
VVhen the su biect is too bright, set Built-in ND filter in the setup menu (_ 104) to reduce the light
and shoot.
[] More Information
See"Autofocus" (_33) for more information.
49