Craftsman 247.88787 Operator's Manual page 9

Positionthe chute assemblyoverthe base.See Figure3.
Closethe flangekeepersto securethe chute assemblyto the
chutebase. See Figure4. The flangekeeperswill clickinto place
whenproperlysecure.
NOTE:if the flangekeeperswill noteasily clickinto place,usethe
palmof yourhand to applyswift,firm pressureto the backof each.
.
a.
b.
Removetheflat washerand hairpinclip from the end of the
chutedirectionalcontrol.
insert the end of the chutedirectionalcontrolinto the lower
bracketand securewith the flat washerand hairpinclipjust
removed.See Figure5. If necessary,the lowerbracketcan
be adjusted.Referto ChuteBracketAdjustmentin the
Service& Maintenancesection.
Figure3
f
Figure4
J
9
Figure5
J