One-Touch Recording - Philips CCB193AT Owner's Manual

30 One-Touch Recording
• o•.o• o. o • °o•°o• ° o o. • °• o . °°•oo •° •• • o • • • ll,lJoo • •l .00 .ooJ.ooo. •,t • •0 .oo•1o •,.•••..•1 •o 0• ,•••to•••••• ••• o •• o • • • ••
The One-Touch Recording (OTR) function allows you to program an
immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin,make sure:
• Channelsare set up.
• There is a tape in theTV/VCR.The record tab mustbe intact.
I
Use the CH(annel) _lv button or the Number buttons to
select the channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen, Details are on page 29.
,
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately.The RECORD light will appear.
_OOTR LENGTH 030 1
CHF2
L_NGTH PRES_ OTR
CANCEL PRES_ CLEAR
_ J
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on theTV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR
button, then press the STOP/V button on the remote con-
trol.
4
2
3
Helpful Hints
To check the time remaining for an
OTR after the OTRhas been set,
press the STATUS/EXIT button.
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
the screen.
You can not pause an OTR.
To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
Youcannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
You can change the tape speed with
the SPEEDbutton while a recording
is in progress, but some distortion
may appear on the tape.
If the end of the tape is reached
during an OTR, the TV/VCR will eject
the tape and turn itself of_