Blue Background - Philips CCB193AT Owner's Manual

46 Blue Background
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF.When you select a
channel that is receiving a weak signal,you will see and hear the
static in the TV programming.
To set BLUE BACKGROUND to ON or OFF,follow the steps
below.
I
Press the MENU button.
•PR"SE O 1
_/_R CR PROGRAM
! VCR SETUP
CAPTION
EMINDER
[_ BRIGHTNESS
2
I
Press the PLAYIA button or the STOP/v button to select
VCR SETUP, then press the P.FWD_ button.
• ONETIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [OFF]
SELECT &V CHOOSE •
O END PRESSEXIT
3
Press the PLAYIA button or the STOP/v button to select
BLUE BACKGROUND.Then, press the F.FWD/_ button
repeatedly so that OFF (or ON) appears beside BLUE BACK-
GROUND.
; VC'ESETUP 1
ONE TIME PLAY [ON}
REPEAT PLAY
ON-SCREEN
MODE
DEFEAT RECORDING [OFF]
• BLUE BACKGROUND [ON]
SELECT &V CHOOSE •
O END PRESS EXIT
4
Press the STATUSIEXIT button.
Helpful Hint
A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON.To
avoid having the brief blue screen,
set BLUE BACKGROUND to OFF.