Philips CCB193AT Owner's Manual page 7

DO
Hooking UpYour
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Detailsare on page 3 h
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO In Jack
on the front of the TV/VCR.
AUDIONIDEO In
Jacks on front of
TV/VCR
Use aVideo cable to connect theVIDEO OUT Jack on the
VCR to theVIDEO In Jack on the front of the TV/VCR.
2
Plug in the TV/VCR's power cord.
3
Before you turn on theTV/VCR, go to page eight.
Helpful Hints
Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• Audio and video cables are not supplied.
Crooked Pin
Bent pin
Straight Pin