Philips CCB193AT Owner's Manual page 10

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
I
Press the MENU button.
VCR PROGRAM
CAPTION
REMINDER
RIGHTNESS
2
Press the PLAY/. button or the STOP/V button to select
PRIM. SETUP, then press the F.FWD,_ button.
SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON 1
SET CLOCK
SELECT &v CHOOSE I_
O END PRESS EXIT
3
Press the PLAY/A button or the STOPIV button to select
AUTO PROGRAMMING, then press the F,FWD/II_ but-
ton. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable channels
automatically, and the TV/VCR will memorize its available channels.
,QOC) ,
C3 C3 CD _
CD CD E3
OCD
O O L
Wait for theTV/VCR to set up
channels.
4
Wait for a few minutes, When setup is complete, CHANNELS
ARE SET will appear on the screen.Then the programming of the
lowest channel number placed in the TV/VCR's memory will
appear on the screen. Now, when you press the CH(annel) _/_
button, you will scan only through channels you receive.
Helpful Hints
• Line Input mode will always be
stored in the TV/VCR's memory as
channel 00.You cannot delete it.
• You can not select AUTO PRO-
GRAMMING at step 3 if you are in
Line Input mode.