Advertisement
Opr more convenient Direct
layback connections the TV's
Front AudiolVideo Input panel can
be used. Located next to the TV's
front control panel (under a small
cover door) these Input jacks allow
for quick and easy connections,
particularly for the playback of
Camcorder tape recordings.
To view the playback of a
Camcorder recording using the
Audio/Video Input jacks on the
front of the TV:
.-'S'x..
(1,_
Connect the VIDEO OUT jack
f tom the Camcorder to the Front
VIDEO IN jack on the TV.
(_'_
Connect the AUDIO OUT
I acks R(ight) and L(eft) from the
Camcorder to the Front AUDIO IN
jacks on the TV.
<_
Select the "AUX 3"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED, highlight
• with the MENU (M) 4-_ buttons.
Then press the MENU button.
(4--_
Press the MENU AY and
I
ENU (M) buttons to highlight
and select (t,,") the AUX 3 mode.
_.5_
Turn the Camcorder
ON and
e.
press PLAY to view the tape on
the TV.
Remember, after it is
connected an easy way to
select the AUX 3 mode is to press
the VCR button on the front of the
TV (or the TV/VCR button on the
remote.) Channels 3 and 4 can
also be selected in this way.
Or if you have added AUX 3 to
the TV's channel memory (see
page 14), just press the
CHANNEL AY buttons to select
the VCR/AUX mode.
PICTURE AND SOUND FROM PLAYBACK
FRONT AUDIO/VIDEO
JACKS
Lift Up on Jackpanel
Cover Plate
to expose Input Jacks.
VIDEO IN
(YELLOW)
AUDIO/VIDEO
OUTPUT JACKS
ON CAMCORDER
CAMCORDER
If you have a single (monaural)
Audio Output Camcorder,
"Y"
connectors are available to complete
your connection. Contac! your
dealer, or our Parts Information
Center (I-800-292-6066)
to order
any optional accessories.
Advertisement
