Advertisement
_ja
e TV's Audio/Video
Input
cks are for direct picture and
sound connections
between
the TV
and a VCR (or Video Disc Player,
etc.) that has Audio/Video
Output
jacks.
To view the playback of a VCR
tape by using the Audio/Video
Input jacks on the TV:
@
Connect the VIDEO OUT jack
] from the VCR to the VCR/AUX
VIDEO IN jack on the TV.
<_
Connect the AUDIO OUT
I jacks R(ight) and L(eft) from the
] VCR to the VCR/AUX AUDIO IN
I jacks on the TV.
,Select
the "VCR/AUX 1"
PICTURE
SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDhighlight
with the MENU (M)_
buttons.
Then press the MENU button.
Press the
and
MENU AY
I MENU (M) buttons to highlight
and select (u,")the VCR/AUX
mode.
<_
Turn the VCR ON and press
I PLAY to view the tape on the TV.
PICTURE AND SOUND FROM
PLAYBACK
OF VCR TAPE
®
NOTE: Connections
and useof the
TV's AUX 2 Audio/Video
Input jacks
are the .same as for the VCR/AUX
I
jacks (except "AUX 2" is selecled as
the Picture Source in step 3).
BACK OF "FV
VCR
l lf you have
a single
(monaural)
Audio Output
VCR,
"Y" connectors
are available
to complete
your
connection.
Contact
your dealer,
or
our
Parts Information
Center
(I-800-
292-6066)
to order
any optional
accessories.
Remember, after it is
_-connected an easy way to
select the VCR/AUX mode is to
press the VCR button on the front
of the TV (or the TV/VCR button
on the remote.) Channels 3 and 4
can also be selected in this way.
Or if you have added VCR/AUX
to the TV's channel memory (see
page ! 4), just press the
CHANNEL &V buttons to select
the VCR/AUX mode.
26
Advertisement
