Magnavox FP4640 Manual page 24

.![i!:
_y adding optional external
IL_ speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
_,,._ Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<_ Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
<_ Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (u') position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
@
_ja e TV's Variable Audio Output
cks can also be used for
Surround Sound. Once they are
connected taean external hi-fi
system its speakers can be used for
the playback of Surround Sound.
<_ Connect R(ight) L(eft)
the and
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
<_ Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(_) position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
@
+
REAR SURROUND SOUND
SPEAKER TERMINALS
BACK OF TV
Remember, !
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
control is turned
ON - see page 22).
REAR SURROUND SOUND SPEAKERS
Note: The tear Surround Sound speakers will not
be heard atthe same volumelevel _.sthe front TV
speakers. It is intended for the rearspeakersto give
a backgroundnoise effect which requires a lower
volume level than theTWsfront speakers.
REAR SPEAKER REAR SPF "R
W PRIMARY VIEWING AREA
BACK OF TV
AUDIO
INPUT JACKS
VARIABLE AUDIO
OUTPUT JACKS
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND SOUND SPEAKERS
24