Advertisement
mm
I
th the use of an optional Dolby
rround Prologic Amplifier you
can receive the added sound
dimension found only in Dolby
Surround programs. Dolby Surround
combines wide left-to-right stereo
separation with solid center channel
imaging, complemented by a front-to-
back soundfield effect. The result for
you the listener is to create a movie
theater or concert hall "you are there"
sound sensation.
_ 1,_,_ Connect the FIXED Audio
Output jacks on the TV to the AUX
INPUT jacks on a Doiby Prologic
Audio Amplifier system.
<_-_'_ Connect the CENTER
CHANNEL Input jack on the TV to
the CENTER PRE-AMP jack on the
Dolby Proiogic Amplifier.
<_
Connect the rear set of Surround
Sound speakers to the (+,-)
connections on the Dolby Surround
Amplifier.
Place the Audio System's Front and
Rear Surround speakers as shown in
the picture on this page.
_z,_Tum
the TV ON. Set TV Volume to
normal listening level. Place the TV's
TV SPEAKERS (Sound Menu 2 of 3)
control to "CENTER CHANNEL
INPUT".
Turn the Dolby Prologic Amplifier
ON. Place its SURROUND MODE
control to the l)_olby Prologic mode.
_---_
The full effect of DOLBY
SURROUND
programs (either
broadcast, VCR, or VDP) can now be
heard through the TV and Amplifier
system speakers.
m
m
Remember. R(ight)/L(eft)
channel stereo sound and rear
Surround sound will be heard from the
external (or Dolby Prologic Amplifier
system) speakers. The TV's front
cabinet speakers are used for true
Center Channel sound necessary to
complete the Dolby Prologic Surround
arrangement.
I
You will need the following to set-up and use the designed
SURROUND SOUND system shown below:
• One set of rear Surround Sound speakers
!. One Dolby Prologic Audio Amplifier (with Center Pre-Amp
Output and twin speakers)
One DOLBY SURROUND
encoded source (either playback -
VCR, VDP, etc.- or broadcast).
AUDIO
SURROUND
CENTER
PRE-AMP
Dolby Prologic
Left Front
Right Fmnl
Speaker
jack's
volume, bass, 8rid treble
levels can be adjusted
with the
TV's VOL&V buttons or using
_he o_screen
Mer_
controls.
_J__Su_ound
Speake_
LREAR
SURROUNO
SPEAKERS
R SPEAKER
OUTPUT
Q
--
_i
SPEAKE R OUTPUT
R, L AUDIO INPUT
, io
CENTER
R, L FIXFO
CHANNEL
Amplifier
umoOUTPUT
INPUT
i
LEFt'SPEAKER
CENTER
CHANNEL
U_ the noise sequencer (or sound test signal) on
the Dolby Prologic Amplifier, Adjust the Center
Channel volume level (using the Dolby Prologic
Amp's
Center Channel Volume control) to equal
the left/right and surround speaker volume levels.
If Center Channel volume is still too low after
using the Dolby Prologic Amplifier, use the TV's
Volume control buttons to set desired Center
Channel level•
Make sure the TV's BALANCE control is set to
the middle position or the Center channel sound
image will not be centered.
U_ the Dolby Prologic Amplifier's
Volume
buttons to adjust the surround system .soundlevel.
REAR SURROUND
SOUND
SPEAKERS
RIGHT
SPEAKER
25
Advertisement
