Advertisement
<
hen using the TV remote
with a VCR, first make
certain it is set to control your
VCR ( by the REMOTE
CODE or
SEARCH
method
- see earlier
section).
Press
the VCR
System
button
on the remote.
,_ Point the top of the remote
toward the front of the VCR
(remote sensor window) when
pressing buttons.
O
Record
Button
Hold the RECORD button down, and
then press the PLAY button to begin
a VCR recording.
Rgwind Button
Press to rewind tapes. For some
VCRs you may need to press STOP
button first then REWIND. In
playback mode. hold button down to
view picture moving rapidly in
reverse.
Pause Button
Press to temporarily stop the tape dur-
ing a playback, or recording. Press
again to release Pause.
TV-V_R
Button
Press to the VCR _osition ("VCR"
indicator on the VCR will light) to
view the playback of a tape• Press
again to place in the TV position
("VCR" irldicator on the VCR will go
OFF) to view one program while
recording another program.
When used with the TV the TV/VCR
button works as a source button. Each
press cycles the TV between channels
3 and 4; the last view channel; and
any AUX(iliary) Input mode (if it has
been connected.) It is a quick one-
button way to select these channels
and modes (without directly entering
the TV's Menu system•)
PLAY
STATUS
PAUSEII
CONIOFFI POS_ SWAP _ FREEZE)
PIP
(P/YIJEX STRB X
SIZE)
•Play Button
Press to playback a tape. Hold down
after pressing the RECORD button to
start a recording.
Press to stop the tape.
Press to rapidly advance the tape. For
some VCRs you may need to press
STOP first then FF. In Playback
mode hold button down to view the
picture moving rapidly in the forward
direction.
.Chonnel
Scan
Buttons
Press to scan up or down through
VCR channel numbers.
.Number
Buttons
Press buttons for direct VCR channel
selections.
VCR System Button
Press to send remote commands to
the VCR.
pQw¢r Button
Press to turn the*VCR ON and OFF.
Remember, the VCR
i buttons on the remote will
not operate your VCR. if those
features are not already found on
your VCR remote control.
Note: All VCR functions
(particularly Search, Rewind, Fast
Forward, etc.) will operate the
same as with the original VCR
remote control provided with th
VCR.
41
Advertisement
