Advertisement
C_linvergence
is the correct
sing up of the red and blue
light paths
on the TV screen.
NOTE:
If no color fringing
(see
Smart Help) shows,
then no
Convergence
adjustments
are
necessa_
for your TV.
<_
Select CONVERGENCE
control.
With PICTURE MENU (2 of 2) on
screen, move the REDhighlight
with the MENU (M)4_
buttons.
Then press the MENU button.
_
If there is RED or BLUE color
fringing on the White cross, press
the MENU button to continue.
<_
Press the MENU _1. buttons
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
_
Press the STATUS button to
clear the screen when convergence
adjustments are complete.
@
Remember. Convergence
=ihas been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
PI_ruRE
MENU
i,
i
, a
•
20_2_
If there is RED or BLUE
fringe ontheWHITEcross,
usethis adjustment to
impr_=_ctura.
press "M" m Continue
- oP-
Press
")" to Return
NOTE: Adjustments
for "Multi-Point"
on-
MULTI-POINT
CONVERGENCE
screen color fringing can aJso be made as part
of the TV's Cortvergence control system.
Follow the TV's on-screen menu directions to
select individual screen areas that can be
re.adjusted and sat for varying red/blue color
fringing conditions. These multi-point settings
can then be "Saved" to memory for the
specific areas oftbe TV screen (or Faatory
Settings for convergence
can be recalled and
put back into place for use).
z777
+ + E+:+
I++++
+++++
+ + c+3+ +
+++++i
Advertisement
