Advertisement
Tthe
S(uper)-Video connection on
he rear of the TV can give you
better picture detail and clarity, for
the playback ofS-VHS VCR tapes or
Video Discs, than the normal
antenna picture connections.
Note: The VCR (or Video Disc
Player) must have a S-VIDEO
OUT(put)jack
in orderforyou
to
complete the connections shown on
this page.
<_
Connect the S-VIDEO (S-
VHS) OUT jack from the VCR to
the S-VIDEO AUX 1 IN(put)jack
on the TV.
The S-VIDEO connecting cable
will be supplied with the S-VHS
VCR (or Video Disc Player).
<_
Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUDIO AUX lIN(put)
jacks on the TV.
_
Select the "AUX 1 S-VIDEO"
PICTURE SOURCE controI.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
The "AUX 1 S VIDEO" picture
source option appears only when a
S-VIDEO cable has been connected
to the TV's AUX 1 IN(puts).
<_
Turn the VCR ON and place it
in the S-VIDEO (or S-VHS)
playback mode. Insert S-VHS
cassette tape and playback in a
normal manner.
PICTURE AND SOUND FROM
PLAYBACK OF S-VHS VCR TAPE
NOTE: Connections
and use of the
TV's AUX 2 S-VIDEO Inpet jacks are
the same as for the AUX 1 S-VIDEO
selected as the Picture Source in step 3).
jacks (except "AUX 2 S-VIDEO" is
BACK OF "IV
CABLE
IS-VIDEO
OUT
_
AUDIOOUT
(RED/WHITE)
S-VHS VCR
NOTE: A CD-i (Compact Disc Interactive)
player, Video Game, or other S-VIDEO
accessory can be hooked up to the TV using
this type of conr,ectt on. Pleas¢ be aware that
such video sources, which show a eomram
non-moving patter, on the TV r, c rccn, can
cause pictttre tube damage. When not in use
turn your video accessories
OFF. Also.
mguhirIy alternate theus_ of video sources
with normal TV viewing.
Remember, after it is
connected an easy way to
select the AUX 1 S-VIDEO mode
is to press the TV/VCR button on
the remote.)
Also, if you have added AUX I to
the TV's channel memory, you
can just press the CHANNEL AY
buttons to select the S-VIDEO
mode (when active).
35
Advertisement
