Advertisement
_ae
fOllowing example is for an
lternative PIP connection
hookup using an external Cable
Converter Box and a VCR (as the
picture source for the PIP
window).
First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable Convener
and the ANTENNA A plug on the
rear of the TV.
Connect the CABLE OUT on
the Converter to the ANT. IN on
the VCR.
Connect the VIDEO OUT jack
on the VCR to the VIDEO IN
jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to the
AUDIO IN jacks on the TV.
O
m
Contact the Pans Information
Center I 8_0 851-8885
to orde_ any optional accessccies
REAROFTV
Remember
to use the Cable TV
Converter Box to
select channels for
PIP, the VCR must
be set to the same
channel as the
channel selection
switch on the rear of
the Cable Converter
(either channel 3 or
4).
T be ANTENNA
A signal input supplies the TV's
Main screen picture, and the AUX l VIDEO Input
¢onnectioll from the VCR f_xvcs as the picture
source for PIP. Be sure to set the TV_s PiP
SOURCE SELECT con_ol to the "AUX l
VIDEO" mode i_ order to display the Audio/Video
Input signals within the PIP window.
AUDIO VIDEO CABLES
(RCA Plug Cabl_
- optional)
VCR
CABLE TVCONVERTER
53
Advertisement
