Advertisement
(see
.previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list c
channels in the TV's memory.
<_
Sdect CHANNEL
MEMORY
(ADD/DELETE
CHANNELS)
control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) _*_buttons.
Then press the MENU button.
_" '_ Press the CHANNEL &V or
number buttons to select the
channel you want to add or delete.
<_
Press the MENU
button to
ADD the channel into the TV's
memory,
Press the MENU • button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
<_
Press the STATUS
MENU
or
I button to clear the screen when
through.
0
Remember. You can also
[add the AUX 1 VIDEO,
AUX 2 VIDEO, AUX 1 Y PB PR,
or SIDE VIDEO modes just like a
channel. Then by pressing the
CHANNEL &._" buttons the
AUX(iliary) mode can quickly be
selected to use the desired set of
Input jacks (see page 33).
Note: AUX(iliary) VIDEO modes
are located between the lowest
and highest channel numbers
within the ADD/DELETE
CHANNEL control screen.
<
14
FEATURE MENU
10F5_
C_'_NNEL MEMORY
NOTE: A separate ADD/DELETE
CHANNEL memory
may also be cr-_tted for the ANT(enna) B Input on the
rear of the set (if an Antenna _ Cabk: "IV signal has be_n
connected). Just press the _
button on the remote,
while in the ADD/DELEIE
CHANNEL
mode, to switch
bu_
the ANT A and ANT B channel n'_rnory lists.
Then follow steps 2 _d 3 as shown to the kft to add or
delete the desired channels.
Advertisement
