Advertisement
The
picture for the TV can come
hrough either the ANTENNA
plug or the AUDIO/VIDEO
INput
jacks (on the rear of the TV). The
Picture Source
control
simply tells
the TV which one of these picture
sources
it is to show on the TV
screen.
i<_l s Select
PICTURE
SOURCE
ELECT
control.
I With the FEATURES
MENU
on
screen,
move the RED.highlight
with the MENU
(M) 45_, buttons.
Then press the MENU
button.
<_
Press
the MENU
A.V
buttons
to move the RED highlight.
Press
the MENU
button to turn the
desired
PICTURE
SOURCE
control ON (_,").
ANT A or B-
for a picture signal
coming from either the ANT(enna)
A or B Input plugs on the TV.
AUX 1 VIDEO-
for a picture
signal coming from the AUX 1
Video Input jack on the rear of the
TV.
AUX 1 Y 1_ PR- for picture
signals coming from the component
(Y Pa PR) luminance and color
input jacks on the rear of the TV.
AUX 2 VIDEO- for a picture
signal coming from the AUX 2
Video Input jack on the rear of the
TV.
SIDE VIDEO- for a picture signal
coming from the Video Input jack
on the right side panel of the TV.
<_
Press the STATUS button to
i clear the scree_
Note: A "S-VIDEO
I" (or 2) Input
will appear as a PICTURE SOURCE
SELECT(ion)
in place of the AUX
I
V[DEO (or AUX 2 VIDEO) position
when the S-VIDEO
plugs(on the rear
of the TV) are connected.
Sc_ page 35
for operating details on S-VIDEO.
Remember, the Auxiliary
Input modes (ALrX 1
VIDEO, etc.) must have a
compatible video signal source
properly connected (to the INPUT
plug on the rear of the TV), or the
TV screen will be blank.
10
Advertisement
