Advertisement
your
remote control is set to
or/: your TV and many
infrared remote (IR) control
VCRs, Cable TV Converter
Boxes, DVD players, Home
Satellite receivers, etc.
However, an easy one-time step
may be necessary before the
remote will work with your
accessory, device.
To begin, try this initial check to
see if going on to the following
section is necessary.
<_
Press the VCR or
ACC(essory)
System button on
the TV remote for the desired
accessory device category.
Note: The ACC(essory) system
button contains product codes
for Cable TV Converters, DVD
players, and Satellite receivers.
<_
Point the
remote toward
TV
I the desired accessory device and
press the POWER button.
_Does
the remote turn the
accessory device ON?
IF YES, •
and try other
function buttons on the TV
remote. If they also work the
accessory device, then the
remote is ready and no further
steps are needed.
If NO, continue...
x%--
<_
First
up a
look
THREE-DIGIT
remote code number for your
brand of Accessory Device before
going through the simple Direct
Access Method steps shown on
the following page.
Find your Three Digit Code
Number on pages 45-46.
TV REMOTE
VCR/ACCESSORY
SYSTEM BU'I_ONS
VCR
SATELLITE
RECEIVER
CABLE CONVERTER
42
Advertisement
