Advertisement
C;mponent
Video Inputs
rovMe for the highest
vossible color and picture
resolution in the playback of
digital signal source material such
as with DVD players. The color
difference signals (Pc, Pn) and the
luminance (Y) signal are
connected and received separately
which permits for improved color
bandwidth information (not
possible when using composite
video or S-Video connections).
_
Connect the Component (Y PB
PR) VIDEO OUT jacks from the
DVD player to the (Y PB PR)
VIDEO IN(put)jacks on the TV.
Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
DVD player to the AUX 1 AUDIO
IN jacks on the TV.
<_
Select the "AUX 1 Y PB PR"
PICTURE SOURCE control on
the TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) 4_} buttons.
Then press the MENU button.
<_
Press the MENU _kV and
MENU (M) buttons to highlight
and select (tl) the AUX I Y PB PR
mode.
<_
Turn the DVD player ON and
press PLAY to view the source
material playback on the TV.
0
on the DVD
DVD PLAYER
(equipped
with Component
Color
& IMimJnanee Outputs)
Opdonal Video/Audio
Cables (with slandard
[
[ RCA plug connectors)
_re available to
I complete your Component
Input Jack
I
connections.
Contact your dealer, or our Pai_s
Information Center (] -800-S51 -SSgS) to o_'der
I any optional accessories.
J
)layer or accessory digital source
equipment used (e.g. Y PB Pr; R-Y/B-
Y/Y; Cr/Cb/Y, etc.). Although
abbreviations and terms may vary, the
letters "'B" and "R" stand for the blue
and redcolor component signal
connectors and "Y" indicates the
luminance signal. Refer to your DVD
or digital accessory Owner's Manual
for definitions and connection details.
!
36
Advertisement
