Control Panels - GE HTDP120ED0WW Owner's Manual

IMPORTANT SAFETY INFOR/V/AT/ON.
READ ALL INSTRUCTIONS BEFORE USING.
Ai,WARNING!
For sour safety, the information in this manual must be followed to minimize the
risk of fire or explosion, electric shock, or to prevent property damage, persona/
injury, or death.
• Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or ang other appliance.
• Installation and service must be
performed bg a qualified installer,
service agencg or the gas supplier.
WHAT TO DO IF YOUSMELL GAS:
[_ Do not try to light a match, or cigarette,
or turn on ang gas or electrical
appliance.
F_ Do not touch ang electrical switch; do
not use ang phone in gout building.
r_ Clear the room, building or urea of
oil occupants.
F_ Immediately call sour gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions carefullg.
r-_ If gou cannot reach gour gas supplier,
call the fire department.
%
2
California Safe Drinking Water and Toxic Enforcement Act
This act requiresthe governor of California to publish a list of substances known to the state to cause cancer,
birth defects or other reproductive harm and requires businessesto warn customers of potential exposure to
such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide,
formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LPfuels.
Properlyadjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized
further by properly venting the dryer to the outdoors.
PROPERINSTALLATION
This drger must be properlg installed and located in accordance with the Installation Instructions
before it is used. If Sou did not receive on Installation Instructions sheet, Sou con receive one bg
visiting GEAppliunces.com or bg coiling 800.GE.CARES (800.432.2737).
• Properlyground dryer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
• Install or store where it will not be exposed to
temperatures below freezing or exposed to
the weather.
• Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
• Remove all sharp packing items and dispose of
all shipping materials properly.
• Removethe colored protective tape from the
control panel.
Exhoust/Ducting:
r-1-1 All dryers MUSTbe exhausted to the outside to
prevent large amounts of moisture and lint from
being blown into the room.
D Use only rigid metal/4" diameter ductwork inside
the dryer cabinet and use only rigid metal/4"
diameter or UL approved transition ducting
between the dryer and the home duct. USEOF
PLASTICOROTHERCOMBUSTIBLE DUCTWORK
CAN CAUSE A FIRE.PUNCTUREDDUCTWORK
CAN CAUSE A FIREIF IT COLLAPSES OR
BECOMES OTHERWISE RESTRICTED IN USEOR
DURINGINSTALLATION.
For complete details, follow the Installation
Instructions.