Download  Print this page

GE GTDN500EMWS Installation Instructions Manual

Ge 7.0 cu. ft. stainless steel capacity electric dryer with sensor dry
Hide thumbs

Advertisement

Installation
Instructions

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT-
IMPORTANT-
Note to Installer -
Note to Customer -
NOTE: Installation and service of this dryer
requires basic mechanical and electrical
skills. It is your responsibility to contact
a quali ed installer to make the electrical
connections.
TOOLS YOU WILL NEED
SLIP JOINT PLIERS
FLAT BLADE SCREWDRIVER
Questions on Installation? Call: 800.GE.CARES (US)
TOOLS YOU WILL NEED
KIT WX08X10077 (INCLUDES 2 ELBOWS)
PHILLIPS SCREWDRIVER
LEVEL
www.GEAppliances.com (US)
WARNING
RISK OF FIRE
DO NOT
Connecting The Dryer To House Vent
4" DIA. METAL DUCT
(RECOMMENDED)
4" DUCT
CLAMPS (2)
OR
4" DIA. FLEXIBLE METAL (SEMI-RIGID)
4" SPRING
UL LISTED TRANSITION DUCT
(IF NEEDED)
CLAMPS (2)
4" DIA. FLEXIBLE METAL (FOIL TYPE)
UL LISTED TRANSITION DUCT (IF NEEDED.)
234D1582P004

Electric Dryer

04
Installers:
4" DIA. METAL
SAFETY
EXHAUST
ELBOW
GLASSES
HOOD
3/4" STRAIN
RELIEF
DUCT TAPE
GLOVES
UL RECOGNIZED
4" COVER PLATE (IF NEEDED
(KIT WE1M454)
31-16224-2 03-12 GE
DRYER POWER
CORD KIT
(NOT PROVIDED
WITH DRYER)
UL RATED
120/240V,30A
WITH 3 OR 4 PRONGS.
IDENTIFY THE PLUG
TYPE AS PER THE
HOUSE RECEPTACLE
BEFORE PURCHASING
LINE CORD.

Advertisement

loading

  Related Manuals for GE GTDN500EMWS

  Summary of Contents for GE GTDN500EMWS

  • Page 1: Electric Dryer

    Installation Instructions Questions on Installation? Call: 800.GE.CARES (US) BEFORE YOU BEGIN Read these instructions completely and carefully. IMPORTANT- IMPORTANT- Note to Installer - Note to Customer - NOTE: Installation and service of this dryer requires basic mechanical and electrical skills. It is your responsibility to contact a quali ed installer to make the electrical connections.
  • Page 2: Electrical Connection Information

    3/4", UL RECOGNIZED WIRE STRAIN RELIEF 4 #10 AWG MINIMUM COPPER CONDUCTORS OR 120/240V 30A POWER SUPPLY CORD KIT MARKED FOR USE WITH DRYERS & PROVIDED WITH CLOSED LOOP OR SPADE TERMINALS WITH UPTURNED ENDS (NOT SUPPLIED). NEVER LEAVE THE...
  • Page 3: Exhaust Information

    NEUTRAL (White) 3 #10 AWG MINIMUM COPPER COVER CONDUCTORS OR 120/240V 30A POWER SUPPLY CORD KIT MARKED FOR USE WITH DRYERS & PROVIDED WITH CLOSED LOOP OR SPADE TERMINALS WITH UPTURNED ENDS (NOT SUPPLIED). 3-wire Connection WARNING: NEVER LEAVE THE COVER OFF OF THE TERMINAL BLOCK.
  • Page 4: Exhaust Connection

    Installation Instructions EXHAUST INFORMATION (cont) SEALING OF JOINTS INSULATION EXHAUST CONNECTION WARNING - TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY: THIS DRYER COMES READY FOR REAR EXHAUSTING. IF SPACE IS LIMITED, USE THE INSTRUCTIONS IN SECTION 10 TO EXHAUST DIRECTLY FROM THE SIDES OR BOTTOM OF THE CABINET.
  • Page 5: Alcove Or Closet Installation

    Installation Instructions CONNECTING THE DRYER TO HOUSE VENT RIGID METAL TRANSITION DUCT UL-LISTED FLEXIBLE METAL (SEMI-RIGID) TRANSITION DUCT UL-LISTED FLEXIBLE METAL (FOIL-TYPE) TRANSITION DUCT ELBOW HIGHLY RECOMMENDED ELBOWS HIGHLY RECOMMENDED DON’T DO NOT USE EXCESSIVE EXHAUST LENGTH ALCOVE OR CLOSET INSTALLATION MUST INFORMATION BATHROOM OR BEDROOM INSTALLATION...
  • Page 6 Installation Instructions GARAGE INSTALLATION (IF ALLOWED BY LOCAL CODES) DRYER EXHAUST TO RIGHT, LEFT OR BOTTOM CABINET WARNING - BEFORE PERFORMING THIS EXHAUST INSTALLATION, BE SURE TO DISCONNECT THE DRYER FROM ITS ELECTRICAL SUPPLY. PROTECT YOUR HANDS AND ARMS FROM SHARP EDGES WHEN WORKING INSIDE THE CABINET.
  • Page 7 Installation Instructions DUCT CAUTION: TAPE Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET CAUTION: Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard.
  • Page 8: Connecting Inlet Hoses

    Installation Instructions CONNECTING INLET HOSES (on some models) NOTE: CONNECTING INLET HOSES (cont.) NOTE: WATER SUPPLY REQUIREMENTS NOTE: SERVICING WARNING LABEL ALL WIRES PRIOR TO DISCONNECTING WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION AFTER SERVICING/INSTALLATION. GEAppliances.com...