GE JVB94 Owner's Manual And Installation Instructions
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Ventilation Hood
  5. JVB94
  6. Owner's manual and installation instructions
GE JVB94 Owner's Manual And Installation Instructions

GE JVB94 Owner's Manual And Installation Instructions

Downdraft vent systems
Hide thumbs Also See for JVB94:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Instructions & Owner's Manual
ge.com
Safety Instructions
.......
9, 3, 7
Operating
ImtrucCions
Cooking
Tips
................
5
Raise/Lower
Switch ...........
4
Using the Cooktop
...........
4
Using the Downdraft
Svsmm
. . .4
Care and
Cleaning
Grease Fihers
................
5
Painted
or Metal Surfi_ces ......
5
Stainless Smel Surfaces
........
5
Installation
Instruc'dons
Advance Planning
..........
8, 9
Before You Begin .............
6
30" Cooktop/Downdraft
Units.[VB37
and.[VB94
.......
10
36" Cooktop/Downdraft
Units.[VB67
and.[VB98
.......
11
Dimensions
and Clearances
. .7, 8
Ductwork
.............
8, 13, 15
Electrical
and Gas Location
.... 8
Installation
Possibilities
........
9
Installing
the Downdraft
Vent System
.............
10-I 7
Optional
Kits ...............
17
Power Supply
...............
12
Raise/i,ower
Switch ..........
16
Venting
Options
............
14
Troubleshooting
Tips
.......
18
Consumer Support
Consumer
Support
..........
20
_'arrantv
...................
19
Write the model and serial
numbershere:
Model #
Serial #
You can find them on a label on
the side ot the blower housing.
JVB 3 7
JVB67
}vs94
JVB 98
4g-80437
11-08 JR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JVB94 and is the answer not in the manual?

Questions and answers

Related Manuals for GE JVB94

Summary of Contents for GE JVB94

  • Page 1: Table Of Contents

    Safety Instructions ..9, 3, 7 Operating ImtrucCions Cooking Tips ....Raise/Lower Switch ... JVB 3 7 Using the Cooktop ... JVB67 }vs94 Using the Downdraft Svsmm . . .4 JVB 98 Care and Cleaning Grease Fihers ....Painted or Metal Surfi_ces ..
  • Page 2 iMPORTANT S AFETY iNFORMATiON. READ ALLiNSTRUCTiONS BEFORE U SING. PLEASENOTE: The downdraft vent system you have purchased was designed to be used with OE, OEProfile and OE Profile Performance cooktops listed in this manual. For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
  • Page 3 _e.conl SAFETY P RECAUTIONS WARNING - To R EBUCE RISK WARNING - TO R EBUCE RIsK OFF/RE, A COOKTOP GREASE FIRE: USEONLYMETALDUCTWORK. A. Never leave sm_fime units unattended at high Do not attempt to repair or replace any settings. Boilovers cause smoking and greasy i)ai_ of}ore hood unless it is specificall) recommended...
  • Page 4 Usingthe downdraft system. Raise/Lower Switch (30" models only) NOTE: Formostconvenient operation, set the ON by pressing Turn the downdrafl blower Mowerto thespeedyouusemostoften.The the _aise/lower switch located at the top Mowerwill comeonto thisspeedwhenever fight ot the vent. Place your finger on the theunit is ral2ed "center"...

  • Page 5: Cooking Tips

    W;IYIII s{Idsv National Parts Center 1.800.626.2002 or polish. _dways wipe the sill fhce ill the direction ot tile grain. Follow the cleaner ge.com instructions fiw cleaning the stainless steel Stll [iice.
  • Page 6 Install " Downdraft Vent instructions System BEFORE YOU BEGIN REMOVE PACKAGING Read these instructions completely Open the carton and remove parts package. carefully. Check contents to be sure all pieces present. (The parts package may be attached • iMPORTANT - Save t hese to the power cord.) instructions...

  • Page 7: Safety Instructions 9

    Installation Instructions DiMENSiONS AND CLEARANCES -&CAUTION -Wall coverings, countertops cabinets should withstand 200°F. heat generated any cooktop. 8½" 7½" 2¼£ ......l_stJ 27 t_ 7V8'_ 10 ½" _3%" _=,==. 30" Models 30" 281/4" 36" Models 36" 333A " AWARNING! recommended for island installations.

  • Page 8: Raise/Lower Switch

    Installation instructions ADVANCE PLANNING CLEARANCES DUCTWORK * Installation must conform with local codes. Prepare ductwork to vent to the outdoors. * The downdraft system with blower, motor Use the shortest and straightest duct and duct work will occupy the cabinet possible.

  • Page 9: Installation Possibilities

    Countertop Base to sink overhang 30 _ to 42" per cooktop clearances must maintained Filler Filler panel Base panel Cover cabinet Base sink panel panel 30" Min. for JVB37 and JVB94 36" Min. for JVB67 and JVB98...

  • Page 10: Installing The Downdraft Vent System

    Installation Instructions INSTALLING THE DOWNDRAFT VENT SYSTEM 30" COOKTOP/DOWNDRAFT UNITS JVB37 AND JVB94 NOTE: Before begin, measure and mark 21/8 tree depth to ensure that adequate fiat countertop surface is available. Identify the cutout illustration for the cooktop model you are installing...
  • Page 11 Installation instructions 36" COOKTOP/DOWNDRAFT UNITS JVB67 AND JVB98 NOTE: Before begin, measure and mark 21/8" depth to ensure that adequate fiat countertop surface is available. Identify the cutout illustration for the cooktop model you are installing with this downdraft vent system. 3/8"...

  • Page 12: Power Supply

    Installation instructions iNSTALLiNG THE DOWNDRAFT VENT SYSTEM POWER SUPPLY This downdraft vent must be supplied with 120V, 60Hz., and connected to an individual, properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Gas Cooktops If this vent is installed...
  • Page 13 90 ° Elbow 90 ° Elbow SHOULD NOT EXCEED 150 EQUIVALENT FEET *Equivalent lengths of duct pieces are based on actual tests conducted by GE Evaluation Engineering and reflect requirements for good venting performance. See chart for CFM Duct Length.

  • Page 14: Venting Options

    Installation instructions iNSTALLiNG THE DOWNDRAFT VENT SYSTEM VENTING OPTIONS To Change to a Left or Right Discharge Remove the 4 screws holding the blower Side-to-Side Adjustments to the mounting plate assembly. Retain The entire blower mounting plate can be screws. adjusted 31/2"...
  • Page 15 Installation instructions iNSTALL THE DOWNDRAFT VENT iNSTALL THE DUCTWORK Use minimum 26" gauge galvanized 24 gauge aluminum duct 31/4" x 10" or 6" round. PVC duct should be used if installing under a poured concrete slab. DO NOT USE flexible ducting.
  • Page 16 Installation instructions iNSTALLiNG THE DOWNDRAFT VENT SYSTEM iNSTALL THE RAiSE/LOWER Remove protective film from the top of the switch trim. SWITCH Peel film from the adhesive strips on the NOTE: Step 3 is for 36" models only= back of the switch trim.

  • Page 17: Optional Kits

    Installation instructions OPTIONAL KITS [] CONNECT THE POWER JXRB67 optional accessory for indoor remote Plug power cord into a properly grounded location of the blower/motor assembly. receptacle. this kit when the blower and motor assembly will be located below the cabinet floor.

  • Page 18: Troubleshooting Tips

    Before you call for service... Troubleshooting -tips Save time and mone)/! Review the chart below first and you may not need to call for service. Possible Causes What To De the Ridse/Lower Fan does not work vent is not fully extended, * Press switch.
  • Page 19 This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service Location for service.

  • Page 20: Consumersupport

    Caution must he exercised, since impreper servicing may cause unsafe operation. ContactUs go. corn If you are not satisfied with tile service you receive fl'om GE, contact us on our Website with all tile details including your phone numbel;...

This manual is also suitable for:

Jvb67Jvb98Jvb37

Table of Contents